Armorcast Warhound #1 - 40

It was too fast, there won't be any post #42 for my first Armocast titan.

Ready for the Battle !

The banner's created with oldies and wome personnal stuff.

You can find :
- the warhound's "m" 

-T for Adeptus Titanicus

-The French Britain Cross

I added some extra detail son the warhound's rear. Based on the epic model, there wasn't much.

I tried to use bigger cables, but due to mecanical problems, I had to choose smaller ones. They seem a bit too small, unfortunately.

The base.

I tried my best.

Wish you enjoyed it, I'm working on another one...

Armorcast Warhound #1 - 37

Here she is.
Needs a banner and a painted base.

Armorcast Warhound #1 - 36

No real progress on the warhound this week, just added some,more aging on the titan. 

I finally found enough time to work on the last missing detail on the left leg. 

Ultra thin plastic card, grey primer, some hours drawing et voilà.

I still need to paint like a parchment, redraw all the letters and glue it on the titan left leg. 

Armorcast Warhound #1 - 35

I have done a lot of work this week.
I finally founded how to rust the white parts and it works pretty well.

Both arms are battle damaged, so does the body and the head.

To do list :
 - Add a parchment on the left leg
 - Redo the rust on the shield generator
 - Get every part soiled
 - Create the banner
 - Finish the base

And, if I'm working hard enough, she'll be ready before Halloween.
(stay tuned !)

Armorcast Warhound #1 - 34

Close up on the right leg

Still workin on the battle damages.

I'm not really satisfied with these but it's better than what I did before.

Armorcast Warhound #1 - 33

All parts are painted, now I'm on the battle damages !

armorcast-warhound #1 - 32

I'm now working on the warhound's arms.
Mega bolter and plasma gun.

I have some pink shadows on the plasma, because I didn't use the right brush. 😕

Anyway, it's fun tonwork'on this old lady, she's impatient to be back on the battle field

Armorcast Warhound #1 - 31

 It's been a while, but I'm back.

Painted the eyes before puting her on her legs, where she waits for her arms.

I didn't show any legs' details, so here you are :

-on the left : right leg's detail. I created a unicorn symbol in a 80's mimimalist style.

- on the right : the ace of spades before painting. Needed some preparation.

Armorcast Warhound #1 - 30

It's not because I had some holidays that I wont work on the warhound.

Legs are done for now.

Hunting group, trophies checkered leg and Princeps symbol are painted.

I'll work on the metallics later.

Right now I'm working on the uper body.

I don't know if I'll keep it clean or add some symbols.

Armorcast Warhound #1 - 29

Many news since last post.

First, I finished the icons.

There's a unicorn on a blue circle on the right leg, ande a red lightning and a yellow ace of spades on the left leg. 

I made the first red highlights, more to come. 

And the shield generator paint was modified. 

And the Base is painted, but not finished. 

Armorcast Warhound #1 - 28

How did I get the checkered leg ?

First, you have to apply masking tape on the leg, even where you need the checkered paint.

First, you have to trace all the vertical lines.

It's easier when the horizontal ones aren't done yet, because you need to place all these lines around the leg.

And they aren't parallel to each other.

Because the base is larger than the top.

It's a bit tricky but once you get it, it's easy to do.

Good news : horizontal lines are parallel to each others. ;-)

Now all the lines are on the aera you need to be checkered, you need to put some pencil to see the checks.

The penciled squares will be removed and painted in the new color.

After using some sharp tool to cut the squares that have to be removed, you can see the checkred aera take place.

Red undercoat, et voilà...

Armorcast Warhound #1 - 27

The beast is fully undercoated.
Now I need to paint her.

Armorcast Warhound #1 - 26

Grey undercoat ? check.

White undercoat ? check.

Black undercoat ? check.

...

Lets add some masking tape and get the warhound ready for the red undercoat.

Then everything will be ok for the real painting time.

Armorcast Warhound #1 - 25

Now I'm back on tracks, the second color is applied.

I'll use the same color sheme, like the one I used for my previous knights.

Next color will be black. and then... RED.

Armorcast Warhound #1 - 24

Seems my last week post disappeared in the warp...

Last week, i was finally done with the greenstuff on all the warhound parts.

Or so did I think...
I undercoated some parts and, when it dried, I discovered a bunch of tiny holes and flash lines I didn't see before.
[Cries out loud]

I took some minis plastic filler and used to fill all the holes in could see now.

I'll go back to bases colors when I'm done with the holes filling stuff for the second time...

Armorcast Warhound #1 - 22

It's so good to be back.

I'm back on this big project, creating a warhound to fight along my -future- Apocalypse Death Guard army.

Even if I had to stop, I'm still motivated.
I had time to think and think again about this project.

This is why I added details to the floor's trap.

And the warhound's foot is not very kind with my work.

Armorcast Warhound #1 - 21

I'm back.
Had my share of familly problems, demotivation and life surprises.

Meh.

Finally came back to the one and only Holly hobby, where I can find peace and silence.

I'm actually working on the base, placing magnets for the warhound's left leg.
Both legs will "magicaly" take place on the base.

Added some details on the base, to create a "loading dock" look.

I'm back, and I'll try to keep it up.

Armorcast Warhound #1 - 20

I finally received my Vallejo surface primer. 

I never tried it before but it seemed better for me to have a grey base on all the mini.
It'll be easier for me to add the white, black and red primer.

Base is on WiP, and I had some ideas while working on it.
Stay tuned, I'm on it...

Armorcast Warhound #1 - 19

Last steps before paint.

Working with the very few details I founded, identification symbols will be added on the warhound.

On the right side, a blue disc with a unicorn inside

The blue disc is the princeps rank, the unicorn is for the princeps' emblem.

On the left, a yellow ace of spades, the warhound's hunting group symbol.

All these symbols will be painted on the legs' external side, and the shell.

Each legs' inner side will be different.

On the right side, there'll be a black and red checkerboard.
I'll use it as a killer board.

On the left, side, a red lightning.
A fast attack symbol.




The base is a WiP, I'm working onit and waiting for some materials.