Armorcast Warhound #1 - 11

I was productive this week. 

First : magnets under the right foot are done ! 

Three 5 mm magnets will help to keep the warhound up, while I didn't decide what I'll do under the left foot.

Then, I added some banners.

And that didn't fit.

At all.

I decided to cut the width by half, and to keep the pointy one.

Problem was, with the new width, banners didn't fit under the Mega Bolter anymore.

I decided to add some protection
to the underside. 

Slowly and very carefully, I removed enough resin to allow the new 85 x 4 mm plastic card part to fit in.

It's thickness is only .3mm, which isn't enough.

I'll try with a .75mm and I hope the result will be better.